EN-13602:2002; Copper and copper alloys-Drawn, round copper wire for the manufacture of electrical conductors
Base material Cu-ETP1/CW003A
In case of tinned coating: Tin min 99.9%

The plastics have to complaint with:

� The plastics are heavy metal free. Heavy metal concentrations according to EC Directive 2002/95/EC and 2000/53/EC the sum of HG, CR(6+), Pb and Cd shall not exceed 300 ppm by weight.

� The European Standard HD 624.

DEVIATONS

Non allowed

Application

Switchboard cable

Indoor use only.

Construction

1. Conductor

Material: Soft annealed bare copper wire

Diameter of conductor 0.4 mm

2. Insulation

Material PVC TI51 (VDE0819 part 101)

Diameter over insulation 0.7 ^+-0.04mm

Nominal wall 0.15 mm

3. Pair.

Two wires twisted into a pair

(For colours scheme of pairs see table 1).

4. Cable core

4 pairs, for identification the units are wrapped with a PP-binder

Laylength of a 4x2 unit 450mm (+/- 50mm)

Laylength of a 4x4 350mm (+/- 50mm)

5. Foil

Material polyethylene foil

Thickness of foil approx. 23 μm

Overlap of the foil > 25%

6. Foil + braid

Foil Aluminium-polyester laminate,

longitudinally applied

(Aluminium facing outwards in

contact with braid)

Thickness aluminium > 0.009 mm

Braiding wires 0.1 mm, 8 ends tinned copper

Coverage min 60%

7. Sheath

Material PVC TM51 (VDE 0819 part 102)

Diameter over sheath 7.1 � 0.3 mm

Nominal wall thickness of sheath 0.8 mm

Colour of sheath Grey-White (like RAL 9002)

Pair No.	Colour wire a � wire b	Lay length +/- 5mm	Colour of unit
1	White Blue � White Blue	40	Unit 1: Blue
2	White Yellow � White Yellow	59	Unit 3: Yellow
3	White Green � White Green	47
4	White Brown � White Brown	67
5	Grey Blue � Grey Blue	40	Unit 2: Blue
6	Grey Yellow � Grey Yellow	59	Unit 4: Yellow
7	Grey Green � Grey Green	47
8	Grey Brown � Grey Brown	67

Table 1: The second colour is the colour of the ring

Distance of rings a-wire: 10mm, b-wire 20mm

Electrical :

Loop Resistance conductor @ 20�C ≤ 300 W/km

Insulation resistance > 100 Mohm*km

Capacitance @ 800 Hz < 120 pF/m

Capacitance unbalance pair to pair @ 800 Hz < 50 pF/ 100 m

Capacitance unbalance pair to earth @ 800 Hz < 150 pF/100 m (90%)

(10% < 300pF/100m)

Testvoltage wire-wire 800V_dc, no breakthrough

Physical:

Temperature range operating and processing -5�C to +70�C

Temperature range storage -30�C to +70�C

Flametest according to IEC60332-1 pass

Bending radius/setting radius of cable 15*D/7.5*D

Marking : no marking

LABELS

The primary label on every reel contains the following data:

� BeldenCDT Logo.

� Belden EPN number: YE00xxxx.001000 (1000m put-up)

� Item description: 16 PAIR PVC CABLE

S-Y(ST)Y 16x2x0.4 BD

� Date of manufacture: YYYY-MM-DD

� CE marking.

� Length on the reel in meters.

� Size of the label: 48x96mm

REEL 1000m

� Flange diameter (mm) 1000

� Barrel diameter (mm) appr. 560

� Central bore diameter (mm) 80

� Traverse (mm) appr 400

Packaging

� Length tolerance on the reel should be � 0 m.

� The outer end of the cable is fixed with a tape. A stretch foil is pulled around the cable on the reel to cover the full width of the reel.

� The primary label is put on the reel flange.

� Reels should be packed on a pallet 1200X1000 mm. Only ISPM15 materials are allowed to use!

Any information referring to or indicating the manufacturer is forbidden.

Product control

A full test report is required with product measurement results for all items mentioned in this specification.